Get a Free Quote

Contact Information

Ryedale Interiors Ltd
Pinewood House
Westland Road
Leeds LS11 5XA
Tel: 0113 228 6494
info@grgcolumncasings.co.uk

Metal Column CasingsTechnical Specifications

DESCRIPTION
Metal circular column casings clad around H section steel columns or cast concrete columns as an aesthetic decorative finish. The completed casings is not structural. Circular casings are manufactured in two halves – or more depending upon height - with a rebated vertical and horizontal joints.  All joints to be covered on site to give a smooth finish or expressed if required. The completed casings are installed self finished. Metal casings are available in any diameter or bespoke profile with any combination of head or base detail as required.

MANUFACTURER
Ryedale Interiors Ltd, Pinewood House, Westland Road, Leeds. LS11 5XA Contact Roger Hannon, Tel 0113 228 6494 email info@grgcolumncasings.co.uk

MANUFACTURE DETAILS
The Metal column casings are machine folded and pressed to shape with built in stiffeners as required. The material used is either PPC coated Zintec,  PPC Aluminium or Stainless Steel. Thickness of material used is dependant upon design. All casings are to be identified by a unique reference label indicating the project name, panel reference and date of manufacture, for quality control purposes.

PERFORMANCE
The weight of the Metal shall vary depending upon thickness but will be between 10-25kg/m2.
The thickness of the Metal casings will vary but will be generally be between 1.5 and 4.0mm thick.- excluding reinforcement ribs.
Joints should not be considered air or watertight.
The casings can be installed in areas of excessive humidity or internal/external situations.

ACCESSORIES
The Metal casings can be supplied with any combination of recessed head and base detail as required.
Horizontal and vertical joints are generally express joints which are then either filled with colour matched mastic sealant or purpose made matching or contrasting cover profiles to conceal the fixings.
Access panels can be incorporated.

FINISHES
The Metal casings can be supplied in any standard RAL colour where the PPC finish is specified and contrasting bands can be achieved between panels. We can also offer various Sublimation finishes which essentially replicate any finish including, timber, stone, marble etc

MOVEMENT JOINTS
Where required, these are to be detailed by the Manufacturer and are to incorporate flexible junctions to accommodate the movement joint within the Metal panels and the supporting framework.

WORKMANSHIP
All site fixing work to be carried out by suitably trained and NVQ accredited installers.
Support framework to be installed by and as recommended by the manufacturer to suit the individual circumstances of the installation. Fixing and jointing details to be as recommended by the manufacturer Ryedale Interiors Ltd. All materials are to be handled in a safe manner to avoid unnecessary damage and are to be stored off the ground in a dry location away from excessive site traffic.

TOLERANCES
Manufacturing accuracy:

Overall dimensions + or – 3mm
Straightness + or – 3mm
Squareness + or – 3mm
Twist + or – 3mm
Flatness max. 3mm under a 1000mm straight edge.

Technical Drawings

View technical details and drawings for our Metal Column Casings.

 

Specifications

Look at the technical specifications of our Metal Column Casings.

 

Sizes

See a list of standard sizes for our Metal Column Casings.